Update time:2021-08-26 Pageviews:1106
The main function:
Two-channel analog signal acquisition
Key features:
A and B2 channels (simultaneous real-time sampling);
Bandwidth (-3dB): 80MHZ;
Conversion accuracy: 12 bits
Input range: ±1V, ±2.5V, ±5V
Input coupling: AC/DC
Input interface mode: SMA(M)
Input impedance: 50Ω, 1MΩ (can be set)
Input overvoltage protection: ±10V (DC+AV peak value)
Performance parameters:
Number of analog channels: A and B 2 channels (simultaneous real-time sampling)
Bandwidth (-3dB): 80MHz
Conversion accuracy: 12 bits
Input range: ±1 V, ±2.5V, ±5V
Input coupling: AC/DC
Input interface mode: SMA(M)
Input impedance: 50Ω, 1MΩ (can be set)
Input overvoltage protection: ±10 V (DC + AC peak value)
Sampling rate (real-time): When using 1 analog channel, the maximum sampling rate is 200MS/s; when using 2 analog channels, the maximum sampling rate is 100MS/s. At the same time, the sampling rate of each channel can be adjusted to 1kS/s, 2kS/s, 5kS/s, 1MS/s, 2MS/s, 5MS/s, 10MS/s, 20MS/s, 50MS/s, 100MS/s, 200MS /s (for single channel).
Buffer memory: DDR2, cache 1G
Data transmission interface: PCIE interface, transmission speed 533MB/s
Trigger: external trigger and A channel trigger
Trigger type: rising edge, falling edge
External trigger input: Connector type: SMA
Input impedance: 50Ω
Continuous sampling time of each channel after triggering: ①10μs -1000μs (set by software, step 1μs). ②The buffer memory capacity is limited.
Overvoltage protection: ±10 V (DC + AC peak value)
Integrated independent pulse signal generator: rising edge of pulse: ≤5ns;
Pulse width: 10ns-200ns adjustable (10ns step)
Repetition frequency: 1KHz-20KHz (1 KHz step)
Pulse amplitude: support 0-10V adjustable, (0.5V step), accuracy 1%
Output: SMA(M), impedance 50Ω, provide signal output and synchronous trigger output (synchronous trigger adopts TTL5V level, without amplitude modulation)
System measurement accuracy: 0.2%; non-linear error: ±3LSB (maximum);
Effective bit (ENOB): 9.1
Operating temperature range: 0°C to 40°C
Storage: –20°C to 60°C
Board size:
Try to be 15cm*10cm
Included software:
(1) PC test software for Windows 7 64-bit (32-bit compatible);
(2) SDK and sample program and driver interface for Windows (dll library link file, which can be directly called by labview, and the library file function is specified by the user);
(3) The software can output txt files, (database files, which belong to the software function can not be added)
Note:
(1) The internal FPGA can average the collected data curve for a specified number of times and output the result (average number 0-32768 can be set).
(2) Reserve FPGA debugging ports and some resources, allowing users to write algorithms and debugging by themselves.
Copyright ©2021 Shenzhen Hongxinyuan Industrial Technology Co., Ltd. All Rights Reserved.